How to Use a Sandblast Booth
- Written by News Company
Abrasive blasting or sandblasting is the process of applying abrasive materials through a high-pressure stream to remove paint or smoothen a rough surface. You can read more when you click here. This is a great tool when one wants to prepare complicated operations such as powder coating on vehicles or appliances.
Sandblasting can remove paint, rust, and other imperfections so that the finished surface will be smoother. One can also use this method when they are sandblasting glasses for specific designs. The technique is usually done inside a booth to ensure the safety of the people who will be doing this.
There are a lot of cabinets or sandblast pots, and one needs to understand the proper setup of equipment, proper techniques, and safety requirements to do the sandblasting successfully.
First Steps in Using the Equipment
The first step is to set up the equipment, and there will be a few key points that you need to know about this. You need to identify the type of sandblaster that you are using since there are two types that you can choose from.
The first type is the suction blasters that are meant to touch up or redo work. They are not intended for blasting off new paints or smoothing up a surface for the first time. The second one is the pressure blast pots that can be commonly found in many sandblasting jobs. The pressure types should ideally be used inside booths where you will do the majority of your work.
The size of the nozzle and the compressed air will be the determiners of the speed of the blast. The larger the vents, the faster you will be able to do your work. However, the larger nozzles will require more air. You should also check the hose’s diameter is it can impact the air pressure and volume that will affect your job. The bigger the tube, the more productive you will become.
Safety for You
Now that you know the basics of the equipment that you should use, you need to have the safety gear that is required by OSHA. There is a lot of hood respirators, carbon monoxide monitors, and safety systems that you should add to your booth.
Before doing the job, it is essential to inspect the line or air of your booth and make sure that they don’t have any wear or bumps. Read more about sandblasting booths here: https://www.wisegeek.com/what-is-a-sandblasting-booth.htm.This will make sure that the cables of the blast hoses are secure. This can prevent the tubes from whipping in case the connection comes out loose from the blast pot.
Using the Blasting Pot
You need to connect the air to the pot, make adjustments to the pressure to the sandblaster, and hold the hose at a safety distance. After these, you need to adjust the stream as you do the work.
When you have the proper equipment already set up, start by connecting the supply of air to the pot. Another person who is inside a safety gear holds the hose while another can adjust the stream. The tube should be held securely, and these can be done by holding it by both hands.
How Booths Can Help You
There are lots of sand blasting booths that are used to keep the workers safe as much as possible. The booth will provide a balanced environment regardless of the weather outside. This means that even if you are living in a place that experiences plenty of sand storms, the finished product will still be smooth because of the controlled environment inside the booth.
The right booths will have LED lights or fluorescent fixtures, roof panels, aluminum seam caps, and silicone sealants. Some manufacturers can custom made these booths for your needs. There will be a dust collector and filters included in your booth. If you are inside a facility, the air filters and dust collectors will ensure that the other workers who are not into sandblasting productions will still breathe fresh air inside.
Providing an efficient and safe environment for abrasive blasting should be one of your topmost priority. There are lots of these kinds that are easy to assemble so that you can use them wherever you are. If you are interested, you can choose a manufacturer that adheres to government and safety codes that are required in your place.
